ICEFOXES AIRSOFT REPLICA

Tokyo Marui SGR-12 Shotgun is the next generation of their full automatic Tri-Barreled shotgun series, The highest quality materials, with an alloy upper receiver, Handguard Rails, and internals with Polymer stock, Lower Receiver, Pistol Grip and Magazine. This shotgun is constructed as you expect from Tokyo Marui.

This AEG Shotgun features the same FET Multi Safety Logic System, but now includes a battery safety detection system which stops the user from installing batteries which are too powerful, and displays a bright red LED next to the power wire if a problem is found. The FET also detects problems with the weapon, such as a blockage, and prevents firing to protect the gun.

The weapon comes with a modern M-LOK Modular Handguard, with three extra rails in the box allowing the user to fully customise their weapon to their hearts desire, and allows for a wide variety of aftermarket parts to be attached.

The weapon features a Tri-Barrel system, allowing each cycle to fire three BBs, one from each barrel. Each barrel in the weapon is independent, each with its own Adjustable Hop-Up unit for range and accuracy which can be set separately for extra accuracy.

The Hop-Up works by adding spin to the BBs to add range by displacing Air, with the bottom Two Barrels being twisted to add Spread to the weapon to more accurately simulate a real shotgun.

The rear of the weapon features a Rubberised Stock to prevent Slippage, along with a Heavy Duty Alloy Sling Mount for attaching Slings to support the weapon when it is not in use.

Product Code	SGR-12
Item Weight (gram)	4428
Major Color	Black
Length	735mm
Barrel Length	~220mm
Hop-up	Adjustable
Shooting Mode	Semi/Fully Automatic
Power Source	8.4V 1,300mAh Ni-MH Mini S Battery
Fit Battery Pack	Stock Pipe (Li-Po)
Magazine Capacity	96 Rounds
Bullet Type	6mm BB
Power (Muzzle Velocity)	280 FPS

TOKYO MARUI SGR-12 AEG SHOTGUN

AEG > TOKYO MARUI > TOKYO MARUI SGR-12 AEG SHOTGUN

The KP-13 GBB Pistol features a stylish pistol frame has been known for years before the introduction of the similar pistols that uses polymer body; automated safeties built into the trigger were known from the 1930s (Sauer Model 30 pistol), and pre-cocked firing pins from the first decade of the 20th Century (Roth-Steyr M1907).The rounded-shaped grip of the typical full-size KP-13 is of a comfortable and ideal shape, at least for many shooters.

Combining excellent mechanics with the authentic-looking aesthetics of the exterior. As you would expect from KJ WORKS, this is a well-built gas blowback pistol, which is mechanically and physically very solid. Hard-kicking blow back system makes you feel pleasant to shoot it. Internal hammer system allows the gun to be pre-cocked for instant shooting. The trigger design means that accidental discharge is prevented unless you deliberately pull the trigger with your finger. One of major changes i features is a steel slide which allows a stronger recoil from every shot.

The hop-up dial can be adjusted once you take apart the slide. Disassembly is exactly like the real thing. Pull down on the disassembly lever and move the slide forwards off the frame. The hop-up dial is located on the barrel assembly which is visible after you remove the slide. Available in Gas or CO2 variants.

Product Code	KP-13-UG-CO2
Item Weight (gram)	770g
Major Color	Urban Grey
Length	180 mm
Barrel Length	~95mm
Blow Back	Yes
Hop-up	Adjustable
Shooting Mode	Semi Automatic
Power Source	CO2 Gas
Magazine Capacity	23 rounds
Power (Muzzle Velocity)	300 FPS

KJ WORKS KP-13 GBB PISTOL (CO2, URBAN GREY)

GBB PISTOL > KJ WORKS > KJ WORKS KP-13 GBB PISTOL (CO2, URBAN GREY)

MODEL > OTHER GBB PISTOL > KJ WORKS KP-13 GBB PISTOL (CO2, URBAN GREY)

The KP-13 GBB Pistol features a stylish pistol frame has been known for years before the introduction of the similar pistols that uses polymer body; automated safeties built into the trigger were known from the 1930s (Sauer Model 30 pistol), and pre-cocked firing pins from the first decade of the 20th Century (Roth-Steyr M1907).The rounded-shaped grip of the typical full-size KP-13 is of a comfortable and ideal shape, at least for many shooters.

Combining excellent mechanics with the authentic-looking aesthetics of the exterior. As you would expect from KJ WORKS, this is a well-built gas blowback pistol, which is mechanically and physically very solid. Hard-kicking blow back system makes you feel pleasant to shoot it. Internal hammer system allows the gun to be pre-cocked for instant shooting. The trigger design means that accidental discharge is prevented unless you deliberately pull the trigger with your finger. One of major changes i features is a steel slide which allows a stronger recoil from every shot.

The hop-up dial can be adjusted once you take apart the slide. Disassembly is exactly like the real thing. Pull down on the disassembly lever and move the slide forwards off the frame. The hop-up dial is located on the barrel assembly which is visible after you remove the slide. Available in Gas or CO2 variants.

Product Code	KP-13-UG
Item Weight (gram)	770g
Major Color	Urban Grey
Length	180 mm
Barrel Length	~95mm
Blow Back	Yes
Hop-up	Adjustable
Shooting Mode	Semi Automatic
Power Source	Green Gas / Top Gas
Magazine Capacity	23 rounds
Power (Muzzle Velocity)	290 FPS

KJ WORKS KP-13 GBB PISTOL (GAS, URBAN GREY)

GBB PISTOL > KJ WORKS > KJ WORKS KP-13 GBB PISTOL (GAS, URBAN GREY)

MODEL > OTHER GBB PISTOL > KJ WORKS KP-13 GBB PISTOL (GAS, URBAN GREY)